Broadband-Hamnet™ Forum :: Hardware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :WRT54GTM.. 2012-03-17- 06:21:03 
NT5LA
Member
Joined: 2012-03-09- 17:24:37
Posts: 26
Location: 
 

Just wondering if anyone has used one of these model routers.    I have the opportunity to buy three of them but I want to be sure first.


Thanks!!!

Andrew

NT5LA
IP Logged
Abandon hope all ye who enter here.
 Subject :Re:WRT54GTM.. 2012-03-18- 11:36:47 
NT5LA
Member
Joined: 2012-03-09- 17:24:37
Posts: 26
Location: 
 
Well to answer my own question, I read on wikipedia that the WRT54GTM is the same as a WRT54GS v3. So yea it will work and it has the higher ram capacity. So I bought 3 of em. Nodes 2-4 will be on the air soon.
IP Logged
Abandon hope all ye who enter here.
 Subject :Re:Re:WRT54GTM.. 2012-03-19- 18:56:56 
W5LMM
Member
Joined: 2012-02-13- 18:18:04
Posts: 126
Location: Albuquerque, NM
 


Awesome!!!!!




[NT5LA 2012-03-18- 11:36:47]:

Well to answer my own question, I read on wikipedia that the WRT54GTM is the same as a WRT54GS v3. So yea it will work and it has the higher ram capacity. So I bought 3 of em. Nodes 2-4 will be on the air soon.
IP Logged
 Subject :Re:WRT54GTM.. 2012-06-20- 22:54:31 
KD7MG
Member
Joined: 2012-05-07- 10:44:55
Posts: 4
Location: Layton, UT
 

Just flashed a WRT54G-TM and it's now working perfectly. Maybe I went the long way around the barn, but here's how I went from the stock -TM firmware to the HSMM-MESH firmware...

I first followed the instructions found here to load DD-WRT...

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=212455#212455

Once that was done, I used the built-in flash utility found in DD-WRT to load the HSMM-MESH firmware using the binary for a WRT54GS.
IP Logged
Last Edited On: 2012-06-20- 23:13:13 By KD7MG for the Reason
 Subject :Re:WRT54GTM.. 2012-06-30- 11:30:24 
KE5WHF
Member
Joined: 2012-06-29- 13:04:24
Posts: 3
Location: Aggieland
 
So how has the WRT54G-TM performed so far?
IP Logged
 Subject :Re:WRT54GTM.. 2012-07-05- 06:53:27 
KD7MG
Member
Joined: 2012-05-07- 10:44:55
Posts: 4
Location: Layton, UT
 
It works great. Once flashed, it looks, feels, and acts just like any WRT54GS v3.
IP Logged
 Subject :Re:WRT54GTM.. 2012-07-10- 11:37:08 
Joined: 2024-12-22- 10:42:31
Posts: 0
Location: 

I recently got a WRT54GTM and tried many different variations/methods of installing the HSMM-MESH firmware. I echo KD7MG and say the method mentioned above is (right now) the only way to get it to work on this particular router.

I messed up a couple of times and bricked the router.  I found that only way to recover (without JTAGing it) is to follow the instructions on dd-wrt with respect to going back to the stock Linksys firmware and trying again from step 1.

http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G-TM


EDIT:  Make sure you select "reset to default settings" on the router before upgrading from dd-wrt otherwise you will have missing information on your HSMM-MESH node.
IP Logged
Last Edited On: 2012-07-14- 12:05:38 By for the Reason
Page # 


Powered by ccBoard


SPONSORED AD: