Broadband-Hamnet™ Forum :: Problems & Answers
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :NanoStation Loco M2 problem.. 2015-04-30- 14:53:57 
KK6HRJ
Member
Joined: 2015-03-24- 09:12:04
Posts: 7
Location: 
  • 0

I uploaded the firmware on a NanoStation Loco M2, upgraded it, and was able to get to the initial setup page.

When I changed the node name, and my password, the unit rebooted, and now I can no longer get to the web page to log into the unit. I also get a red LED on the third LED from the left. Have no idea what that even means.

I can see this node from my linksys mesh node, but when I click the link it comes up with web page unavailable.

I get no response when I ping 192.168.1.1, nslookup can't find the server.


IP Logged
 Subject :Re:NanoStation Loco M2 problem.. 2015-05-01- 14:09:39 
KK6HRJ
Member
Joined: 2015-03-24- 09:12:04
Posts: 7
Location: 
I finally figured it out. I had set a static ip to 192.168.1.2 as the instructions told me to. Today I realized that the node provides DHCP, so I set it to obtain the IP automatically, and then did an ipconfig, and found out that the ip is 10.38.39.201 and I was able to connect immediately. So everything was working just fine, I just had to think about it a bit.
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: